Slow control system development based on fire protection modules for NICA-MPD

Authors

  • N. V. Dunin Dubna State University, Dubna, Russian Federation
  • M. J. Peryt Warsaw Polytechnic University, Warsaw, Poland

Keywords:

NICA-MPD, Slow control, SNMP protocol, data acquisition, fire protection systems

Abstract

This article presents possible solution in the field of fire protection and automation. Automatic fire extinguisher module is described. Communication with electronic devices was based on TCP/ IP and SNMP protocols. The implementation of a distributed fire protection system based on autonomous modules for protecting RACK cabinets is proposed. The logic of the communication protocol is widely described and used in this article. The problem solution is realized in the LabVIEW graphic programming environment.

Author Biographies

N. V. Dunin, Dubna State University, Dubna, Russian Federation

A 6th-year student of the Department of Electronics Design for Megasiens Installations of the Dubna State University.

M. J. Peryt, Warsaw Polytechnic University, Warsaw, Poland

Senior Researcher, Head of the Detector Engineering Support Group MPD of the Joint Institute for Nuclear Research

References

Воронова В.А., Тихонов В.А. Инженерно-техническая и пожарная защита объектов. М.: Горячая линия – Телеком, 2018. 512 с.

Blume P.A. The LabVIEW Style Book. Upper Saddle River, New Jersey: Prentice Hall, 2007.

Installation and User Manual for Extinguishing System. Rev. B. Firesi, 2014. P. 3–29.

Marshal P.S. Industrial Ethernet: A pocket Guide. ISA, 2002. 194 p.

Downloads

Published

2021-08-30

How to Cite

Дунин, Н. В., & Перыт, М. Д. (2021). Slow control system development based on fire protection modules for NICA-MPD. E-Journal of Dubna State University. A Series of “Science of Man and Society”, (2(47), 16–22. Retrieved from https://ein.uni-dubna.ru/index.php/ein/article/view/36

Issue

No. 2(47) (2020): №2(47)

Section

Статьи